technical data sheet rpc-1.00 adaptor plug/jack 01S101-K20D3 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 email : info@rosenberger.de page 1 / 2 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg rf_35/09.14/6.2 all dimensions are in mm; tolerances according to i so 2768 m-h interface according to iec 61169-31 documents n/a material and plating connector parts material plating center conductor cube gold, min. 1.27 m, over nic kel outer conductor cube or equiv. gold, min. 1.27 m, over nickel coupling nut stainless steel passivated dielectric peek
technical data sheet rpc-1.00 adaptor plug/jack 01S101-K20D3 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 email : info@rosenberger.de page 2 / 2 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg rf_35/09.14/6.2 electrical data frequency dc to 110 ghz return loss 3 20 db, dc to 20 ghz 3 17 db, 20 ghz to 50 ghz 3 15 db, 50 ghz to 75 ghz 3 12 db, 75 ghz to 110 ghz mechanical data mating cycles 3 500 maximum torque 0.70 nm recommended torque 0.35 nm gauge 0.00 mm to 0.03 mm general standard definitions for proper operation the vector network analyzer (v na) needs a model describing the electrical behavio ur of this standard. the different models, units, and terms used will depend on the vna type and they wil l have to be entered into the vna. all values are based on ty pical geometry and plating. offset z o / impedance / z o 50 w offset delay 39.094 ps length (electrical) / offset length 11.72 mm offset loss 7.90 g ? /s loss 0.0268 db/ ghz environmental data operating temperature range 1 +20 c to +26 c rated temperature range of use 2 0 c to +50 c storage temperature range -40 c to +85 c rohs compliant 1 temperature range over which these specification ar e valid. 2 this range is underneath and above the operating te mperature range, within the adaptor is fully functi onal and could be used without damage. packing standard 1 pce in box weight 2.1 g/pce draft date approved date rev. engineering change n umber name date herbert babinger 23.03.06 ronny mark 15.03.17 g00 17-0439 marcel panicke 15.03.17 while the information has been carefu lly compiled to the best of our knowledge, nothing is intended as representation or warranty on our part and no statement herein shall be construed as recommendation to infringe existing patents. in the effort to improve our products, we reserve the right to make changes judg ed to be necessary.
|
